Powered by
Digiseller
Digiseller
Macros – No Recoil for Bloody & x7 mice in ARC Raiders remove most of the vertical recoil for the Kettle, Rattler, Stitcher, significantly improving accuracy and thereby increasing the effective range against opponents. Your mouse Bloody must be activated and supported by the BLOODY 7 software. Macros with the .mgn extension are closed for editing — they can only be used and are not compatible with the Bloody WorkShop 8 program. Macros with the .amc extension are for X7 mice, and they can be imported into the Bloody Workshop 8 software. The macros was designed for mouse sensitivity settings in the game ranging from 50, FOV 80, Mouse Zoom Sensitivity Multiplier - 100%, from 100fps and above. KETTLE: level 1...4, Magazine Size - 30, No attachments. RATTLER: level 4, Magazine Size - 22, No attachments. STITCHER: level 1, Magazine Size - 30, No attachments. HAIRPIN: level 4, No attachments. The number 5 in the macro’s name indicates automatic burst fire of 5 shots. This type of firing provides maximum accuracy. <delivery>MACRO VERSIONS:</delivery> If your aiming in the game is toggled by a single right-mouse-button click, then use macro versions: v1.0, v5.1, v5.2 If your aiming works by holding the right mouse button, then use macro versions: v5.4 and v5.5. After enabling these macros, recoil control will activate when both the right and left mouse buttons are held down. If the right button is not pressed, the left button works normally. v1.0.amc and v5.1…amc — Load these macros onto the mouse button F (7th) if your mouse has it, or onto button 3 (wheel click) and side buttons 5 and 4. After pressing the macro button once, recoil control (or another assigned action) will start. v5.2…amc — Load these macros onto the F (7th) button if available, or onto button 3 (wheel click) and side buttons 5 and 4. When you press the macro button, it turns on, and recoil control will activate when pressing the left mouse button. To turn the macro off, press the same macro button again. v5.1…mgn and v5.4…mgn — These macros are loaded onto the top mouse buttons N and 3, located behind the scroll wheel. After pressing the macro button, it activates, and recoil control will work when pressing the left mouse button (for v5.1…mgn). For v5.4…mgn, recoil control will work when both right and left mouse buttons are held down. If the right button is not pressed, the left button works normally. To disable the macro, press the 1 button located next to the N button. ARC_Raiders-SLIDE_RUN-v1.0.amc — Slide running. Press and hold the macro button to initiate slide running. Releasing the button will stop the slide run. ARC_Raiders-ROLL_JUMP-v1.0.amc — Roll jump. After a single press of the macro button, the character will perform a forward jump with a roll. ARC_Raiders-BOLT-v1.0.amc and M-ARC_Raiders-BOLT-v5.5.mgn — For weapons that require manual bolt cycling. VIDEO: dzen.ru/video/watch/691daf3ddfd9403f39f35ea0 <attention> Attention!!! There's a possibility that due to technical issues (such as "Input Lag" affecting macro operation) or with different FOV settings, if other loadout, if the sight pulls down during shooting, you should decrease your in-game mouse sensitivity settings. If it pulls upwards, you should increase them. </attention> If your in-game mouse sensitivity settings are either too high or too low for you, you can adjust your mouse's DPI, which won't affect the macros performance.
<delivery>IF YOU HAVEN'T FOUND THE RIGHT MACRO ON SALE. THEN I CAN MAKE YOU A MACRO FOR A CERTAIN PAYMENT.</delivery> <attention>Attention!!! If you can't pay with a bank card. Then you need Litecoin and get it easy: 1. Sign up for Payeer: https://payeer.com/?session=13084023 2. Register with the European Exchanger: https://changer4u.com/ru/aff/e60c9d86e365ae81439dedefa2ad227e3ac569d6 3. Replenish Payeer with an exchanger. 4. In Payeer replenish Litecoin. 5. When buying, choose Litecoin from the payment methods. When paying with Litecoin, there is no banking commission and the price of the item is lower. You can also pay with skins from Steam: zen.yandex.ru/video/watch/65c05a87bf878653f5ccff1d </attention> <delivery> After payment you will receive a link to download the archive with macros. If you accidentally closed the page with this link, you can return it by clicking on the link in the letter that came to your e-mail after payment. You can also go to your personal account at oplata.info and your purchase will be displayed there. </delivery>